C_TS414_2023 Valid Test Practice | New C_TS414_2023 Exam Camp

Blog Article

Tags: C_TS414_2023 Valid Test Practice, New C_TS414_2023 Exam Camp, C_TS414_2023 Exam Book, Regualer C_TS414_2023 Update, C_TS414_2023 Valid Exam Notes

If you are already determined to obtain an international certificate, you must immediately purchase our C_TS414_2023 exam practice. Our products have been certified as the highest quality products in the industry. If you know C_TS414_2023 training materials through acquaintance introduction, then you must also know the advantages of C_TS414_2023. Our content and design have laid a good reputation for us. Our users are willing to volunteer for us. You can imagine this is a great product! Next, I will introduce you to the most representative advantages of C_TS414_2023 real exam. You can think about whether these advantages are what you need!

It is common in modern society that many people who are more knowledgeable and capable than others finally lost some good opportunities for development because they didn’t obtain the C_TS414_2023 Certification. The prerequisite for obtaining the C_TS414_2023 certification is to pass the exam, but not everyone has the ability to pass it at one time. Because of not having appropriate review methods and review materials, or not grasping the rule of the questions, so many candidates eventually failed to pass even if they have devoted much effort.

>> C_TS414_2023 Valid Test Practice <<

New SAP C_TS414_2023 Exam Camp - C_TS414_2023 Exam Book

You may worry that you still fail C_TS414_2023 exam although you have made full preparation for the exam; or you may afraid that the exam software you purchased is not right for you. Our C_TS414_2023 exam software developed by our TestKingFree will clear your worries. Our C_TS414_2023 exam software will provide two level of insurance for you: the first is the reassuring high pass rate; the second is full refund of your cost you purchased our exam software. Don't worry, if you fail C_TS414_2023 Exam with our software, we will refund the money you purchased our dumps. What you do is to prepare for the exam confidently, and our TestKingFree will be in charge of other issues.

SAP C_TS414_2023 Exam Syllabus Topics:

Topic	Details
Topic 1	Quality Inspection: It explains the configuration requirements of Quality Inspection.
Topic 2	Quality Management in Manufacturing: This topic describes the processes related to implementing QM in Manufacturing.
Topic 3	Managing Clean Core: It focuses on the application of core principles to ERP for enhancing business process agility.

SAP Certified Associate - SAP S/4HANA Cloud Private Edition, Quality Management Sample Questions (Q61-Q66):

NEW QUESTION # 61
You have entered a priority during creation of a notification. What action will this trigger in the system?

A. Calculate the notification start and finish dates
B. Calculate the malfunction start and end dates
C. Create one or more activities automatically
D. Create one or more tasks automatically

Answer: A

Explanation:
Entering a priority (e.g., "High") in a quality notification (transaction QM01):
* Calculate the Notification Start and Finish Dates (C): The priority (set in Customizing, SPRO > QM
> Quality Notifications > Define Priorities) triggers the system to calculate required start and end dates based on response times linked to the priority (e.g., 24 hours for "High"). This is standard behavior for time-sensitive notifications.
* Create Activities Automatically (A): Activities are logged manually or via action boxes, not priority.
* Create Tasks Automatically (B): Tasks require a response profile, not just priority.
* Calculate Malfunction Dates (D): Malfunction dates are specific to equipment notifications (e.g., F2), not driven by priority alone.
Thus, "Calculate the notification start and finish dates" is the correct answer.References: SAP Help Portal -
"Priorities in QM Notifications"; SAP S/4HANA QM User Guide - "Notification Processing".

NEW QUESTION # 62
Which settings are required for the immediate creation of inspection instruction during goods receipt process. Note : 3 correct answer

A. Inspection type settings in Material master
B. Control setting in quality info record
C. Control setting in characteristic of the task list
D. Inspection type settings in the implementation guide (IMG)
E. Settings for print control in implementation Guide (IMG)

Answer: C,D,E

NEW QUESTION # 63
What master data can you integrate into a task list for a production order?

A. Classifications
B. Control indicators
C. Master inspection characteristics (MIC)
D. Material specifications

Answer: C,D

Explanation:
Task lists (e.g., routings) for production orders in SAP integrate QM master data to enable inspections:
* Material Specifications (A): Material specs (transaction QS61) can be referenced in routings (transaction CA01) to define inspection requirements for a material, integrating QM into production.
* Master Inspection Characteristics (C): MICs (transaction QS21) are directly assigned to operations in routings or inspection plans, specifying what to inspect during production.
* Classifications (B): Classifications (transaction CL01) are batch or material attributes, not directly integrated into task lists for production orders.
* Control Indicators (D): These are settings within characteristics or plans, not standalone master data for integration.
Thus, "Material specifications" and "Master inspection characteristics" are the correct answers (assuming a multiple-choice intent, though only two are clearly correct based on standard SAP).References: SAP Help Portal - "QM Integration with PP"; SAP S/4HANA QM User Guide - "Task Lists".

NEW QUESTION # 64
Which QM basic data can be used in the material specification? Note: There are 3 correct answers to this question.

A. Selected set
B. Dynamic modification rule
C. Master inspection characteristics
D. Inspection methods
E. Sampling procedures

Answer: C,D,E

Explanation:
Material specifications in SAP QM (transaction QS61) define inspection requirements directly in the material master, independent of task lists. They integrate specific QM basic data:
* Master Inspection Characteristics (A): MICs are the core of material specifications, defining what is inspected (e.g., length, pH). They are assigned to the material spec to set tolerances or qualitative codes.
* Sampling Procedures (C): These determine the sample size for the material spec's characteristics (e.g., fixed sample of 5). They are assigned to MICs within the material specification.
* Inspection Methods (E): Inspection methods (e.g., "Visual check") can be linked to MICs in the material spec to specify how the inspection is performed.
* Dynamic Modification Rule (B): This governs inspection scope changes (e.g., skip lots) and is assigned to inspection types or plans, not material specs directly.
* Selected Set (D): Selected sets are used for qualitative valuations (e.g., UD codes) but are not directly assigned to material specs; they link via MICs instead.
Thus, "Master inspection characteristics," "Sampling procedures," and "Inspection methods" are the correct answers.References: SAP Help Portal - "Material Specifications in QM"; SAP S/4HANA QM User Guide -
"Basic Data".

NEW QUESTION # 65
Which of the following sample categories can be maintained in the sample-drawing item? Note: There are 3 correct answers to this question.

A. Primary sample
B. Initial sample
C. Sample for storage condition
D. Pooled sample
E. Reserve sample

Answer: A,D,E

Explanation:
Sample-drawing items in the sample-drawing procedure (transaction QPV2) define sample categories:
* Reserve Sample (A): A standard category for samples retained for future testing (e.g., stability), maintained in the procedure.
* Pooled Sample (B): Represents combined samples for collective testing, a defined category in sample management.
* Primary Sample (D): The initial sample taken for immediate inspection, a core category in the procedure.
* Initial Sample (C): Not a distinct category; overlaps with "Primary sample."
* Sample for Storage Condition (E): Not a standard category; storage conditions are attributes, not sample types.
Thus, "Reserve sample," "Pooled sample," and "Primary sample" are the correct answers.References: SAP Help Portal - "Sample Management in QM"; SAP S/4HANA QM User Guide - "Sample-Drawing Procedure".

NEW QUESTION # 66
......

“Quality First, Credibility First, and Service First” is our company’s purpose, we deeply hope our C_TS414_2023 Study Materials can bring benefits and profits for our customers. So we have been persisting in updating in order to help customers, who are willing to buy our test torrent, make good use of time and accumulate the knowledge. We will guarantee that you will have the opportunity to use the updating system for free.

New C_TS414_2023 Exam Camp: https://www.testkingfree.com/SAP/C_TS414_2023-practice-exam-dumps.html

Report this page

C_TS414_2023 VALID TEST PRACTICE | NEW C_TS414_2023 EXAM CAMP

C_TS414_2023 Valid Test Practice | New C_TS414_2023 Exam Camp